The four principles of wearing a shirt with a decent shape


The four principles of wearing a shirt with a decent shape

Many men need to wear shirts when they go to work on weekdays. In this case, how to fit them fit is very important. In addition to the image requirements, comfort is also very important, and there are several principles that can be grasped. Below we will classify several principles from the neck to the waist, hoping to help men.



1.Collar

With the arrival of summer, many men will choose to wear a shirt with a suit trousers, this method of wearing a jacket, but also because this wear will make the upper body become the focus of the overall vision, and at this time the fit of the shirt It becomes very important! Since the effect of the collar can modify the face shape, the first focus on wearing is the "elasticity" of the collar. After the men put on the shirt, the collar should be as close as possible to the neck, but do not lock it to maintain ventilation. The principle of inspection, after men put on a suit, if there are two fingers between the collar and the neck, it is basically a pass.



In short, basically, the collar must have two fingers tight, and the collar should be able to modify the face, so that's right.

In addition, different shirt collars can be used to modify the face. For example, a long-necked collar is suitable for men with a round face, a short-necked collar is suitable for men with a short neck, a wide-angle the collar is suitable for a narrow face, and a wide-width angle is suitable for a long face. Men.

2. Sleeve

In the part of the sleeve, the principle of not too tight is also maintained, and ventilation is required. Generally speaking, it should be worn without a lot of wrinkles. If you find that there are many wrinkles in the arm, it is too big. The cuff should end where the wrist and palm are connected, preferably one inch behind the wrist, and this is for arm movement, so the cuff should not be shortened more than one inch when bending the arm. Hey, if this part is consistent, basically the length of the sleeve is fit.




In the part of the sleeve, the principle of not keeping too tight should be maintained.

3.Shoulder

In the shoulder part, you should be able to fit the corner of your shoulder. This shoulder is the point farthest from your chest. Another way to self-test is to move your arm. The arm should have space. Active, not as uncomfortable as being caught under your armpits, but this type of detection may not be able to find oversized shirts or loose shirts. There is a small beak here if you raise your arms More than 45 degrees above the angle, but the shirt shrinks more than a mile from the pants, then your sleeves are too big.



If the shoulder line of the shirt is bigger than the shoulder, it will make the whole look very unfit and too loose.

4. Body

First of all, the overall shirt should fit, but it is tight and easy to move. For example, some men wear it at the buttons and buttons, and they will leak out because of the collapse. The phenomenon like this is basically too tight, from the waist. The fabric should fit the waist. If you can pull out space from the side, it is too loose, and many people don't know how to control the length of the shirt. Basically, the fabric inside the pants is about 3-4 inches. If you hold on to this principle, the length of the shirt is basically right.



The shirt fits to shape the figure and looks more masculine.



Previous
Next Post »

ConversionConversion EmoticonEmoticon

:)
:(
=(
^_^
:D
=D
=)D
|o|
@@,
;)
:-bd
:-d
:p
:ng